New Holland combines, used combines, headers and harvesting equipment at Pioneer Garage from 3 locations in South Dakota.

CR9000 Twin Rotor® Combines-NEW!

The NEW CR9000 Twin Rotor® combines are the result of over 30 years of rotor technology and field experience. Year after year, the impressive grain quality and harvesting capacity of New Holland combines confirms the effectiveness of the Twin Rotor design.

Model CR9040 Combine
Model CR9060 Combine
Model CR9070 Combine


CX8000 Super Conventional Combines New!

The NEW CX8000 Super Conventional combines are the super choice for fast harvesting! Backed by 100 years of factory production knowledge and more than 40 years of conventional combine experience, CX8000 combines deliver super-fast threshing and separation, less grain damage and a new level of convenience and comfort.

CX8070 Combine
CX8080 Combine
CX8090 Combine


Chopping Corn Header for CR and CX Combines New!


The 99C chopping corn header features two chopping knives for each row unit for optimum chopping and distribution of crop residue—ideal for no-till farming. Automatic controls maximize your control and minimize fatigue.

99C 6-row Chopping Corn Header
99C 8-row Chopping Corn Header
99C 8-row folding Corn Header


Floating Cutterbar Draper Header New!

The 88C floating cutterbar draper headers are the ideal match for high-capacity New Holland combines harvesting on-ground crops. Available in widths from 30 to 45 feet, the 88C hugs ground contours to get every bit of crop and provides consistent, head-first material flow from field to feeder house.

Corn Header for CR and CX Combines

98C Corn Header

The 98C corn header is smooth, fast and durable. It gets under downed corn, picks it up better than the competition and takes in less trash for more combine capacity. Available for 6 row, 8 row and 12 row applications.

Cutterbar Headers for CR and CX Combines

72C Rigid Cutterbar Header

The 72C rigid cutterbar header is available in 20-, 25- and 30-foot widths. The smallest model is equipped with a single-knife drive, while the two larger models feature twin-knife drives.

74C Flexible Cutterbar Header


92C Rice Belt Header

The 92C rice belt header is 25 feet wide and features your choice of single or double knife drive. The 92C is a two-deck, center-mounted header that features a single-feed belt, a large-diameter full-floating auger, and extra-long retractable fingers.

94C Grain Belt Header

The 94C grain belt header is available in 25-, 30-, 36-, 39- and 42-foot widths. Deck shift options on the 30-, 36-, 39- and 42-foot models let you quickly convert from combining to swathing. A self-contained hydraulic system supplies smooth, reliable power to both the draper belts and the knife drive without the use of V-belts, pulleys and chains.

Draper Headers for CR and CX Combines

92C Rice Belt Header

The 92C rice belt header is 25 feet wide and features your choice of single or double knife drive. The 92C is a two-deck, center-mounted header that features a single-feed belt, a large-diameter full-floating auger, and extra-long retractable fingers.

94C Grain Belt Header

The 94C grain belt header is available in 25-, 30-, 36-, 39- and 42-foot widths. Deck shift options on the 30-, 36-, 39- and 42-foot models let you quickly convert from combining to swathing. A self-contained hydraulic system supplies smooth, reliable power to both the draper belts and the knife drive without the use of V-belts, pulleys and chains.

Flex Draper Header for CR and CX Combines

84C Flex Draper Header

The 84C flex draper headers is available in 30- and 36-foot widths and is ideal for in-ground harvesting. Draper design provides smooth, even "head first" feeding in the toughest conditions and increases combine capacity up to 20%. A suspended floating head with flexing wing sections provides 7.5 inches of free vertical and 4.8 degrees of free lateral flotation. The 84C can easily be locked for rigid off-ground direct cutting.

Windrow Pick-up Header for CR and CX Combines

76C Windrow Pick-up Header

The 76C windrow pick-up header is available in 12, 14 and 16-foot widths and two designs: SwathMaster™ Belt Pick-up and Rake-Up™ Pick-up.

SwathMaster™ Belt Pick-up
SwathMaster™ Belt Pick-up uses four individual rollers, a pickup belt that gently lifts crop into the header and a draper belt that carries the crop to the auger and into the feeding area. Choose a model with both front and rear windguard and hydraulic adjustment on the front windguard, or choose a model with a rear windguard with mechanical adjustment.


FX™ Self-Propelled Forage Harvesters

Peak quality silage at peak speed
As a custom harvester or large dairy operator, you’ll appreciate how New Holland FX harvesters let you work faster—in all crop conditions—with added convenience.

FX40 Forage Harvester
FX50 Forage Harvester
FX60 Forage Harvester

Pull-Type Forage Harvesters

When it comes to rugged, high-capacity forage harvesters, no one builds them like New Holland. That's why New Holland continues to offer America's best-selling forage line.

790 Forage Harvester
FP230 Forage Harvester
FP240 Forage Harvester
 
Forage Blowers

The high-capacity F62B forage blower is engineered to quickly center-fill tall silos and make it easy to keep pace with harvesters and wagons.


Crop-Chopper®

Chops a variety of crops Dampness and morning dew won't slow down chopping when you own a multi-purpose New Holland 38 Crop-Chopper®.